Shift Light Type – controls LED’s behaviour as the RPM of the car changes

Value
Description
Single
Lights come on one by one as RPM Increased
Green Red Blue
Lights all green then red then blue LED’s
Side to Center
Lights come on from side moving in to center
Center to Side
Lights come on from center moving out to the side
Custom
Allows modification of LED’s to any setting by dragging the sliders for each LED in “Shift Light Value”

Shift Light Max Gear – controls LED’s behaviour as the RPM of the car changes in maximum gear

Value
Description
Same As
Uses the same value as shift light type
Single
Lights come on one by one as RPM Increased
Green Red Blue
Lights all green then red then blue LED’s
Side to Center
Lights come on from side moving in to center
Center to Side
Lights come on from center moving out to the side
Custom
Allows modification of LED’s to any setting by dragging the sliders for each LED in “Shift Light Value”

OSP Type: controls LED behaviour when Optimal Shift Point is reached. 

Value
Description
Off
No LED’s light at shift point
Highest 5 blink
The 5 LED’s with the highest RPM blink
Blue Flags Blink
The 2 Blue Flag LED’s blink
All RPM Blink
All RPM LED’s blink
High 5 Blue Flags Blink
The 5 LED’s with the highest RPM and the 2 blue flags blink
All RPM Blue Flags Blink
All RPM LED’s and the 2 blue flags blink

Speed Limiter Type – controls LED behaviour while pit speed limit is active (if sim/car supports output)

Value
Description
Off
No LED’s light
Alternate Blinking
Every other LED Blinks
All Blinking
All LED’s blink

OSP Blink time:  Set OSP Blink to 1000/sec (higher means a slower blink)
Optimal Shift Point:   Specifies at which RPM the OSP behaviour should start
OSP Maximum Gear: Tick to show OSP blink in maximum gear
OSP Neutral: Tick to show OSP blink in neutral gear
KPH/MPH: choose which unit type should be displayed (metric or imperial